Filter
Top Products
Switching Automatically
among Multiple Cameras
You can have the unit cycle through the registered
network cameras and display each video feed in turn.
1. On the Home screen, tap
.
2. In Network Camera Viewer, press
.
3. Tap [Camera Select].
4. In the [Camera Select] list, tap [Sequential].
5. Tap [Close].
Note
• When automatic switching begins, the currently
selected network camera’s video feed is
displayed first, and then video feeds are
displayed in the order in which cameras are
listed in the [Camera Select] list.
• Selecting a network camera in the [Camera
Select] list ends automatic switching.
• If you touch the display, automatic switching will
temporarily stop on the current video feed. To
resume switching, tap [Sequential] again.
While switching is temporarily stopped, doing
other operations such as selecting a network
camera ends automatic switching.
Setting the Switching Interval
You can change the length of time video feeds are
displayed before being switched.
1. On the Home screen, tap .
2. In Network Camera Viewer, press .
3. Tap [Camera Select].
4. Press .
5. Tap [Sequential Interval].
6. Tap the desired length of time.
Note
• The factory default value is [10 seconds].
Using Network Camera
Presets
You can select a viewing position that has been
registered in the network camera’s settings beforehand.
These are called "presets".
1. On the Home screen, tap
.
2. In Network Camera Viewer, press
.
3. Tap [Preset].
4. After you press [Preset], select the camera position
you want to view.
5. Tap [Close].
Note
• You can view all the registered presets by
scrolling the list up and down.
• Tapping [Favorite] in step 4 displays the
presets registered as favorites.
Adding a Preset to Your
Favorites
1. On the Home screen, tap .
2. In Network Camera Viewer, press .
3. Tap [Preset].
4. In the [Preset] list, touch and hold the preset you
want to add to your favorites.
5. Tap [Add to Favorites].
Note
• Tapping [Cancel] returns you to the [Preset]
list.
Deleting from Your Favorites
1. On the Home screen, tap .
2. In Network Camera Viewer, press .
3. Tap [Preset].
4. In the [Preset] list, tap [Favorite].
5. Touch and hold the preset you want to delete from
your favorites.
6. Tap [Remove From Favorites].
Note
• Tapping [Cancel] returns you to the [Preset]
screen.
Document Version 2011-09 Operating Instructions 63
Network Camera