Filter
Top Products
Accessibility
Setting Description Value Range Default
Key command on USB
keyboard
Sets whether telephone functions
can be performed by using a USB
keyboard.
On/Off Off
Date & time
Setting
Description Value Range Default
NTP Server
Use NTP
server
Specifies whether to use an NTP
server. If enabled, enter information
for [NTP server address] and
[Synchronization Interval].
On/Off On
—NTP server
address
Sets the NTP server to use. xxx.xxx.xxx.xxx —
—
Synchronizat
ion Interval
Sets the interval for synchronization
with the NTP server.
10–86400 s 43200
Set date
*1
Enter the date here when an NTP
server is not used.
— —
Select time zone Selects the time zone.
Select from 84
regions
GMT +00:00
Set time
*1
Enter the time here when an NTP
server is not used.
— —
Use 24-hour format
Specifies whether the time is
displayed in a 24-hour format (when
off, the time is displayed in a 12-hour
format).
On/Off On
Select date format
Selects the format for the display of
the date.
Normal
*2
mm/dd/yyyy
dd/mm/yyyy
yyyy/mm/dd
Normal
*1
When an NTP server has not been specified, when unit is turned off, time and date settings are lost. Each time the unit is restarted,
the time and date settings must be made again.
*2
The date format associated with this setting depends on the value selected in [Select language locale] (Page 113).
About phone
Setting
Description Value Range Default
Status
Network Displays the status of the network. — —
Phone
service
Displays the status of the phone
service for each configured line.
— —
Legal
information
Open source
licenses
Displays open source license
information.
— —
116 Operating Instructions Document Version 2011-09
Configuration