Filter
Top Products
Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp 95
Wall mounting the charger
The charger can be wall mounted.
1 Using the wall mounting template below, insert two suitably sized screws into the wall.
2 Connect the AC adaptor to the charging cradle.
3 Slide the charging cradle into place securely on the two screws.
Note:
LWhen mounting the charger, ensure that the correct screws for the wall are used.
Certain types of wall may require plugs to be anchored in the wall before the screws are
inserted.
LWhen mounting the charger, care should be taken to place it so that the cordless
handset antenna does not cause a danger when the handset is docked in the charger
unit. Particular care should be taken to ensure that the antenna is not mounted at eye
level or in a position that may pose a risk to people’s eyes.
Wall
Template
2.4 cm
(
31
⁄
32
")
Screws
A
B
C