Filter
Top Products
Voice Mail System
For assistance, please visit http://www.panasonic.com/phonehelp 53
Listening to only new messages
1 While in standby mode and the F
indicator is flashing, press F.
L “This is the general delivery mailbox.” is
announced.
L If there is one new message, “You have
one new message.” is announced.
L If there is more than one new message,
“You have <number> new messages.”
is announced.
L If you have more than 100 new
messages, “You have more than 100
new messages.” is announced.
L If you have no new messages, “You
have no new messages.” is announced.
2 New messages are played.
L The first message is played back, and
the message number is displayed. The
name and number are displayed if you
have subscribed to Caller ID services
(page 47).
L For each message “Message recorded
on <date> at <time>.” is announced,
followed by confirmation tone.
L After each message playback, the next
message plays.
L Press {f} or {g} to repeat the current
message or move on to the next
message, as required. Before the
current message is repeated, “Repeat”
is announced. Before the next message
is played, “Next” is announced.
L After the last message is played, “This
is the last message.” is announced.
3 Press {EXIT} to return to standby
mode.
Listening to all messages
1 While the base unit is in standby mode
and the F indicator is flashing, press
F.
L “This is the general delivery mailbox.” is
announced.
L If there is one new message, “You have
one new message.” is announced.
L If there is more than one new message,
“You have <number> new messages.”
is announced.
L If you have more than 100 new
messages, “You have more than 100
new messages.” is announced.
L If you have no new messages, “You
have no new messages.” is announced.
2 Scroll to “Play all messages” by
pressing {<} or {>}, then press
{ENTER}.
L If you have messages, “You have
<number> messages.” is announced.
L All messages are played.
L If there are no messages, “There are no
messages.” is announced.
L The first message is played back, and
the message number is displayed. The
name and number are displayed if you
have subscribed to Caller ID services
(
page 47).
L For each message, “Message recorded
on <date> at <time>.” is announced,
followed by confirmation tone.
L Press {f} or {g} to repeat the current
message or move on to the next
message, as required. Before the
current message is repeated, “Repeat”
is announced. Before the next message
is played, “Next” is announced.
L After the last message is played, “This
is the last message.” is announced.
3 Press {EXIT} to return to standby
mode.