Filter
Top Products
DECT
Portable Station
DECT Portable Station 5-5
Battery Charge
You need to charge the battery before initial use and when the battery strength becomes low. When
“” flashes or beep tones sound every five seconds during a conversation or “BATTERY EMPTY” is
displayed, recharge the battery or replace with a fully charged optional spare battery. If not, the call will
be automatically disconnected in three minutes.
Standard Battery Life
If your Panasonic battery is fully charged [provided 25°C]:
To install a battery
Hook the bottom of the battery on the PS, and
place the battery until it clicks.
To charge the battery
1. Connect the charger to a power outlet using the AC adaptor.
2. Slide the battery-attached portable station or the battery in the charger.
• Charge the battery for about 1.5 hours.
• When charging is completed, the charge indicator will change from orange to green.
• The battery is used while the PS’s power is ON.
• Battery life may vary depending on usage conditions and
ambient temperature.
• Please use only a Panasonic battery.
• Do not let the charged battery’s electrodes touch metallic
objects. The terminal may short and overheat, causing
burns.
• Clean the charge contacts on both the PS and the charger
with a soft cloth once a month, or the battery may not
charge properly.
• The PS can receive calls even while charging.
• You need not worry about overcharging.
To replace a battery
Set the power switch to OFF first to prevent
memory loss, and then remove the battery
while pressing the tab.
Charge indicator
Cord holder
AC adaptor
To power outlet
(230 VAC, 50 Hz)
Charger
While in use (Talk mode)
While not in use (Stand-by mode)
Up to about 10 hours
Up to about 100 hours
• The AC adaptor is used as the main disconnect
device. Ensure that the socket-outlet is located
near the equipment for easily access.
!!
!!