3-44 Features
L
3 Features
• The same trunk group can be assigned to more than one G-CO key on the same PT.
• The same line can be assigned to an S-CO key and G-CO key. The
S-CO key has priority.
• Immediate, delayed, no ringing or no incoming calls (disable) can be selected by
programs [408] through [413] on an extension-exchange line basis.
• A ringing pattern can be selected for each exchange line by program [423].
• Required System Programming
[400] Exchange Line Connection Assignment
[404] Trunk Group Assignment
[405]–[407] Flexible Outward Dialling Assignment — Day/Night/Lunch
[408]–[410] Flexible Ringing Assignment — Day/Night/Lunch
[411]–[413] Delayed Ringing Assignment — Day/Night/Lunch
[423] Exchange Line Ringing Pattern Selection
• Related Feature References
Outside Calling, Receiving Calls, Ringing Pattern Selection
• Operating Instructions Reference
1.2 Proprietary Telephone Settings, “Customising the Buttons on Your Telephone”,
Line Access Keys
☞
!
!
Log-In/Log-Out
Allows an extension user to Log-In (join) or Log-Out (leave) a hunting, DISA ring or UCD
group temporarily. Extensions in the log-out mode will not receive calls by Extension
Hunting, DISA or UCD but will receive other calls, not like the Do Not Disturb (DND)
feature. The Log-In/Log-Out button can be assigned to a flexible button in the Proprietary
Telephone Settings. The lighting patterns of the Log-In/Log-Out button on a proprietary
telephone and status are as follows.
Off: Log-In mode
Red: Log-Out mode
• There should be at least one extension that is in the
Log-In mode in a group.
• Related Feature References
Direct Inward System Access (DISA),
Extension Group,
Extension Hunting, Uniform Call Distribution (UCD)
• Operating Instructions References
1.2 Proprietary Telephone Settings, “Customising the Buttons on Your Telephone”,
Log-In/Log-Out Button
1.7 Useful Features, “Joining or Leaving a Call Distribution Group (Log-In/Log-Out)”
☞
Log-In
Log-Out
UCD Group
Hunting Group
DISA Ring Group
!
!
PSQX1708ZA-04E.QX 99.10.15 10:31 AM Page 44