4-30 System Programming
[210]-[211] 4.2 System Programming
Assigns the minimum duration of a DTMF signal sent to an exchange line which is set to the
DTMF mode in program [401] “Dial Mode”.
MODE 1: 80 milliseconds
MODE 2: 160 milliseconds
Default MODE 1
0
1
2
[210] DTMF Time
NEXT
SELECT
STORE
END
(MODE1/
MODE2)
Enables or disables disconnecting an exchange line if an extension user does not dial
anything within 20 seconds after an exchange line is seized.
Default Enable (Disconnect)
• The interdigit timer assigned in program [208] “Interdigit Time” applies until the call
barring check is completed. When the timer expires, an outgoing outside call will be
disconnected while dialling, if “Enable” was selected in this program.
• Feature Reference
Section 3, Features
Call Barring
1
1
2
[211] No Dial Disconnection
NEXT
SELECT
STORE
END
(Enable/
Disable)
☞
!
!
PSQX1708ZA-08E.QX 99.10.15 1:01 PM Page 30