Filter
Top Products
1-4 Installation
1.2 System Features
Caller ID
Provides a display proprietary telephone (KX-T7130) user with the caller’s information, such
as the name and telephone number, on the exchange line assigned to receive Caller ID
service.
• A contract with a Telephone Company is required.
• An optional Caller ID Card must be installed to the system.
• All 6 exchange lines can be supported by installing 2 Caller ID Cards. One Caller ID
Card supports 3 exchange lines.
• System Programming is required to execute this feature.
• A display proprietary telephone user can record the caller’s information
(☞ 2.2 Telephone Features, “Call Log, Incoming”). Up to 20 calls can be logged per
extension.
• Only the first 16 digits of the caller’s information can be displayed on the LCD while a
call is being received, or during a conversation. The first 13 digits are displayed when
logged information is shown.
• An assigned name in program [011] “System Speed Dialling Name Setting” will be
displayed when the caller’s telephone number matches one of System Speed Dialling
numbers assigned in program [001] “System Speed Dialling Entry” and a Telephone
Company does not provide the caller’s name.
• If a Telephone Company provides a caller’s name, the name from the Telephone
Company will be displayed even when a name assigned in program [011] is effective.
• If both the number and name are available, the user can select the initial display, number
or name, by program [904] “Caller ID Log Priority Selection”.
• Some Telephone Companies do not provide the caller’s name with the Caller ID service.
• The caller’s telephone number may not be provided in some cases, for example, an
international or mobile telephone call. In this case, the display will show “OUT OF
AREA”, etc.
!
!
PSQX1744ZA-1(E).QX 99.10.15 9:45 AM Page 4