Filter
Top Products
System Programming 4-57
4.2 System Programming [500]
Selects the destination of an incoming outside call via the DISA feature when you select
“DISA 1” or “DISA 2” in programs [414]-[416] “Exchange Line Mode –Day/Night/Lunch”,
Without AA (auto attendant) or With AA . If you select “With AA”, assign the next
program [501] “DISA Built-in Auto Attendant”.
Without AA: Available destinations are: extension numbers assigned in program
[009] “Extension Number Assignment” and the operator number (0 or 9).
With AA: Available destinations are: numbers available in the “Without AA” mode,
and numbers (0 through 9) assigned in program [501].
Default Without AA
• For example: in the “With AA” mode, if a number is not dialled within the programmed
time in [517] “DISA AA Wait Time” after dialling 1, the call is received at the DISA
built-in auto attendant number 1.
• In the
“
With AA
” mode,
if 0 or 9 is not assigned in program [501], the system recognises
them as a the operator number.
• Feature Reference
Section 3, Features
Direct Inward System Access (DISA)
0
0
5
[500] DISA Incoming Dialling Mode Selection
NEXT
SELECT
STORE
END
(Without AA/
With AA)
!
!
☞
PSQX1708ZA-10E.QX 99.10.15 1:06 PM Page 57