Filter
Top Products
4-82 System Programming
[800] 4.2 System Programming
Assigns the communication parameters for the Serial Interface (RS-232C).
NL–Code: Selects the code for your printer or personal computer. If your printer or
personal computer automatically feeds lines with a carriage return, select
“CR”. If not, select “CR+LF”.
Baud Rate: The baud rate code indicates the data transmission speed from the system
to the printer or personal computer.
Word Length: The word length code indicates how many bits compose a character.
Parity: The parity code indicates what type of parity is used to detect an error in
the string of bits composing a character. Make your selection depending
on the requirements of your printer or personal computer.
Stop Bit: The stop bit code indicates the end of a bit string which composes a
character. Select a value depending on the requirements of your printer
or personal computer.
*
1
CR+LF (Carriage Return + Line Feed) / CR (Carriage Return)
*
2
Select “None” when the error checking function is not required from the printer.
Default New line Baud rate Word length Parity Stop bit length
CR + LF 9600 baud 8 bits Mark 1 bit
• To return to the previous mode, press instead of .
• The following combinations are invalid.
If any of the above invalid combinations are selected, an alarm tone is heard.
• Feature Reference
Section 3, Features
Station Message Detail Recording (SMDR)
NEXT
PREV
008
[800] SMDR RS-232C Communication Parameters
NEXT
SELECT
END
(CR+LF/CR)*
1
STORE
NEXT
SELECT
(150/300/600/
1200/2400/
4800/9600 B)
STORE
NEXT
SELECT
STORE
NEXT
SELECT
(Mark/Space/
Even/Odd/
None*
2
)
STORE
(7/8 bits)
NEXT
SELECT
STORE
(1 bit/2 bits)
< Sets the new line code> < Sets the baud rate >
< Sets the word length >
< Sets the parity >
< Sets the stop bit length >
!
!
Word length
8
8
8
Parity
Mark
Space
Space
☞
Stop bit length
2
1
2
(New line)
PSQX1708ZA-12E.QX 99.10.15 1:09 PM Page 82