Filter
Top Products
Default Setting
This system has factory default settings (☞ 5.1, Default Values). If any of the programming
needs to be changed, you can change the setting by System Programming. Default shows
you the factory default setting. Any required changes can be written in the Programming
Tables listed in section 7, Programming Tables.
Required Telephone Set
The following display proprietary telephone is required for System Programming.
• KX-T7130
Connect the telephone to the following.
• Port number 01
Before entering the programming mode
Before entering the programming mode, confirm that:
• Your telephone is on-hook.
• No calls are on hold at your telephone.
Placing the Overlay on a Telephone
A programming overlay is packed with the telephone at the factory. This overlay should be
used at all times during programming. The functions of the telephone keys change during
programming as shown below.
Location of Controls with the Overlay
4-2 System Programming
4.1 Before System Programming
1
23
456
789
0
SECRET
SELECT
CLEAR
PAUSE
STORE
NEXTENDFLASHPREV
, –
AUTO
KX-T7130
System data clear should be performed before System Programming.
(☞ 2.21, Starting the System for the First Time)
NOTE:
PSQX1708ZA-06E.QX 99.10.15 10:33 AM Page 2