Filter
Top Products
4-18 System Programming
[106]-[108] 4.2 System Programming
Enables or disables a locked extension to send a recall signal during a conversation with an
external party.
Default Disable
Enables or disables the 6 DTMF receivers to check whether the DTMF receivers are
activated normally or not. Refer to the Section 6 Troubleshooting, “While Operating” for
further information on checking the DTMF receivers.
* DTMF receiver number: 1 and 2 (for checking extension ports 01 through 08)/
3 and 4 (for checking extension ports 09 through 16)/
5 and 6 (for checking extension ports 17 through 24)
Default All DTMF receivers – Enable
[106] External Paging Access Tone
Enables or disables the splash tone before paging is sent over the external pager.
Default Enable
• Feature Reference
Section 3, Features
Paging
6
0
1
SELECT
STORE
END
(Enable/
Disable)
NEXT
[107] DTMF Receiver Check
7
0
1
NEXT
SELECT
STORE
END
(Enable/
Disable)
[108] Recall Mode for a Locked Extension
0
1
NEXT
SELECT
STORE
END
(Enable/
Disable)
8
(1··6)
DTMF receiver no.*
To continue
NEXT
PREV
or
☞
PSQX1708ZA-07E.QX 99.10.15 10:34 AM Page 18