Filter
Top Products
System Programming 4-35
4.2 System Programming [310]-[311]
Assigns up to 40 automatic pause insertion codes which are checked with the outside
outgoing call number. When one of the codes is the same as the call number, the pause time
assigned in program [417] “Pause Time” is automatically inserted after the code. If a second
dial tone is sent from your Local Exchange, it is convenient to assign the area code as the
pause code.
Default All codes – Not stored.
• To correct a wrong entry, press the CLEAR button and enter the new one.
1
1
3
[311] Automatic Pause Insertion Codes
NEXT
STORE
END
(01
···
40)
pause code
7 digits max.
(0
···
9, ,#)
code no.
SELECT
To continue
To continue
NEXT
PREV
or
Assigns up to 24 account codes which are compared with the code entered when
“Verify-All” or “Verify-Toll (Call Barring)” is selected in program [605] “Account Code
Entry Mode”. If “Verify-All” is selected, an account code is required to make an outside
call. If “Verify-Toll (Call Barring)” is selected, an account code is only required to override
call barring.
Default All codes – Not stored.
• To correct a wrong entry, press the CLEAR button and enter the new one.
• Feature References
Section 3, Features
Account Code Entry, Call Barring Override by Account Codes
0
1
3
[310] Account Codes
NEXT
END
(01
···
24)
account code
4 digits
(0
···
9)
code no.
SELECT
To continue
To continue
NEXT
PREV
or
☞
!
!
!
!
STORE
PSQX1708ZA-08E.QX 99.10.15 1:01 PM Page 35