Filter
Top Products
Features 3-35
3 Features
E
Extension Group
The system supports 8 extension groups. In an extension group, the following features can
be activated.
• Group Call Pickup: Any member of an extension group can pick up a call directed to
another member in the same group.
• Paging – Group: Any member of an extension group can make a voice
announcement to another group member.
A hunting group, DISA ring group or UCD group is a specific extension group. The
following operation as well as the features above can be activated for a hunting group, DISA
ring group or UCD group.
Hunting Group
An extension group enabled in program [100] “Hunting Group Set” will perform the
Extension Hunting feature. See “Extension Hunting” in this section.
DISA Ring Group
All extensions in a DISA ring group assigned as an auto attendant destination in
program [501] “DISA Built-in Auto Attendant” will ring simultaneously. Selecting
“DISA1” or “DISA2” in programs [414]–[416] “Exchange Line Mode —
Day/Night/Lunch” is required. Also, you must select “With AA” in program [500]
“DISA Incoming Dialling Mode Selection”.
UCD Group
One extension group assigned as the UCD group in program [520] “UCD Group” can
be the destination of incoming outside calls via the UCD feature. Selecting “UCD” in
programs [414]–[416] “Exchange Line Mode — Day/Night/Lunch” is required.
• Required System Program Address
[600] Extension Group Assignment
• Related Feature References
Call Pickup, Direct Inward System Access (DISA), Extension Hunting,
Paging, Uniform Call Distribution (UCD)
☞
PSQX1708ZA-04E.QX 99.10.15 10:31 AM Page 35