Filter
Top Products
4-84 System Programming
[803]-[804] 4.2 System Programming
Selects to print or not print (on SMDR) secret dialling numbers stored in program [001]
“System Speed Dialling Entry” and/or stored in One-Touch Dialling even though they are
not displayed on the LCD.
Default No printing
• Feature References
Section 3, Features
Secret Dialling, Station Message Detail Recording (SMDR)
[803] Secret Speed Dialling / One-Touch Dialling Printing
3
0
8
NEXT
SELECT
(No Printing/
Printing)
STORE
END
Starts and stops printing the assigned data. All or a specific area of current system-
programmed data is printed out. The areas are as follows.
All Para: Prints out all data.
System Para: Prints out all data except for the following 4 parameters.
CO Para: Prints out programs [400] through [403] and [405] through [424].
Ext Para: If the extension is a proprietary telephone, programs [102], [516] [600]
through [613] and [615] will be printed out. The assigned data on the PF
(Programmable Feature) buttons and line keys will also be printed out.
If the extension is a single line telephone, programs [102], [516] and [600]
through [614] will be printed out. The assigned Personal Speed Dialling
numbers are also printed out.
DSS Para: Prints out the assigned data in the DSS buttons and PF buttons on the DSS
console.
Speed Dial: Prints out the System Speed Dialling numbers and names assigned in
programs [001] and [011].
Stop Output : Stops printing.
[804] System Data Dump
4
0
8
NEXT
STORE
SELECT
(All/System/CO/Ext/
DSS Para/Speed Dial/
Stop Output)
< To select All parameters, System parameter,
Speed dial and/or Stop output. >
END
To continue
☞
PSQX1708ZA-12E.QX 99.10.15 1:09 PM Page 84