Filter
Top Products
Features 3-37
3 Features
E
• The Remote Extension Lock Control overrides the Electronic Extension Lockout. If the
operator or manager sets Remote Extension Lock on an extension that has already been
locked by the extension user, the user cannot unlock it.
• A call barring class can be assigned to an extension which has set the Electronic
Extension Lockout and Remote Extension Lock Control features in program [312] “Call
Barring – Extension Lock Boundary Class”. Certain types of outgoing outside calls are
allowed depending on the assigned call barring class.
• Operating Instructions References
1.6 Before Leaving Your Desk, “Locking Your Telephone (Electronic Extension
Lockout)”
1.8 Operator / Manager Service Features, “Electronic Extension Lockout – CANCEL
ALL”
1.8 Operator / Manager Service Features, “Remote Extension Lock”
1.9 DSS Console Features “Initial Settings”, Extension Lock Button Assignment
(Operator/Manager only)
☞
!
!
Extension Password / System Password
The extension password assigned by the manager (extension port 01) to each extension can
be used for the Walking COS feature.
The system password is used for entering System Programming and also before assigning
the extension password.
• Required System Programming
[002] System Password
• Related Feature References
Walking COS
• Operating Instructions Reference
1.8 Operator / Manager Service Features, “Extension Password Set (Manager only)”
☞
PSQX1708ZA-04E.QX 99.10.15 10:31 AM Page 37