Palm Zodiac PDAs & Smartphones User Manual


 
Troubleshooting
My Zodiac won’t turn on.
Using Your Zodiac Console 179
179179
179
My Zodiac won’t turn on.
My Zodiac won’t turn on.My Zodiac won’t turn on.
My Zodiac won’t turn on.
Zodiac has a data protection mode which activates if the battery level gets
too low. Plug in the power adapter and let your Zodiac sit for about 5 minutes.
With the charger still plugged in, press the Power button to make sure your
Zodiac turns on. Let the Zodiac continue to fully charge for 2 hours.
My console is not responding.
My console is not responding.My console is not responding.
My console is not responding.
You may have to perform a reset if your console no longer responds to the
buttons on the screen.
A soft reset allows your console to get a fresh start, similar to rebooting a PC.
All records and entries are retained after a soft reset.
To perform a soft reset, use the tip of your stylus (or another object without a
sharp tip such as an unfolded paper clip) to lightly press the reset button
inside the hole on the back panel of your console.
I did a soft reset and my console is still not responding.
I did a soft reset and my console is still not responding.I did a soft reset and my console is still not responding.
I did a soft reset and my console is still not responding.
If you already performed a soft reset and you console is still not responding,
or if you received an error while performing a soft reset, you may have to
perform an extensions-off reset.
Reset
button