Filter
Top Products
60 / Time savers for making calls
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide P0857846 Issue 02
Using Saved Number Redial
You can save the number of the external call you are on (provided
you dialed the call) so that you can call it again later. Each telephone
can save one number at a time with Saved Number Redial, not one
number for each line.
Enter the telephone number you wish to
program exactly as you would if you were
dialing it normally. When you are finished,
press
or OK.
You have entered a code outside the code
range (01-70 for system, 71-94 for personal).
There is no number stored on the speed dial
code you have dialed.
If you want to program a line or line pool
selection for this speed dial number, select
the line or line pool. Otherwise, enter the
telephone number exactly as you would if
you were dialing it normally. When you are
finished, press
.
If you want to program a line or line pool
selection for this speed dial number, select
the line or line pool. Otherwise, enter the
telephone number you wish to program
exactly as you would if you were dialing it
normally. When you are finished, press
OK.
There is no line associated with the speed
dial number you are trying to use. Select a
free external line or line pool and enter the
speed dial feature code again.
The system cannot dial the number stored.
Reprogram the number.
For other displays, see “Common feature displays” on page 149.
Tip -
You can copy a number onto an autodial
button using Saved Number Redial.