Filter
Top Products
128 / Using System features
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide P0857846 Issue 02
Any number of telephones can be assigned to call the direct-dial
telephone.
Hotline
A hotline telephone calls a preset internal or external telephone
number when you pick up the receiver of a hotline telephone (or
press
).
Bypassing a Hotline
Press a line button, or use the Pre-Dial or Automatic Dial feature
before you pick up the receiver or press on a hotline
telephone.
See the
Telephone Feature Card
or see “Changing how
you dial your calls” on page 49.
Making a telephone a hotline telephone
You can set up a telephone as a hotline.
You will need the programming template found at the front of this
guide. See Getting Started for more information.
1. Press .
2. Press (the default System Coordinator
password).
Tip -
The digit you dial in order to get the
direct-dial telephone to ring can be programmed by
your installer or customer service representative.
The Norstar system cannot verify that the number
you assign as an external direct-dial telephone is
valid. Check the number before assigning it as a
direct-dial telephone, and call the direct-dial
telephone after you’ve assigned it in order to test it.
Tip -
Label the telephone to inform anyone using
it that Hotline is active.