Filter
Top Products
Using System features / 133
P0857846 Issue 02 Norstar-PLUS Modular ICS 2.0 System Coordinator Guide
Long Tones
The Long Tones feature lets you control the length of a tone so that
you can signal devices such as fax or answering machines which
require tones longer than the standard 120 milliseconds.
• While on a call, press .
• Press the dial pad buttons to produce the appropriate tones.
Each tone sounds for as long as you hold down the button.
Long tones can be used on any call except a conference call. You
can use internal lines of the Norstar system to activate a device
connected to an analog terminal adapter (ATA) in another area of
your office, or external lines to access devices outside the Norstar
system.
Displays
Programmed Release
The Programmed Release feature performs same function as
in
a programmed dialing sequence. When the system encounters
Programmed Release in a dialing sequence, it stops dialing and
hangs up the call.
The Programmed Release symbol (fi) takes up two of the 24
spaces in a programmed dialing sequence.
The system will ignore any digits or commands that follow a
Programmed Release in a programmed dialing sequence.
Run/Stop
Run/Stop inserts a break point into a sequence of dialed numbers or
characters used for automatic dialing. This may be necessary when
you are connecting to a PBX or similar host system.
At the appropriate time, press any dial pad
button. Hold each button down for as long as
necessary. Press
or
to cancel Long Tones.