Filter
Top Products
16 / Frequently used programming operations
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide P0857846 Issue 02
Select a line for the speed dial code
If you assign a specific line to a system speed dial number, only telephones with
an appearance of that line can use the speed dial number.
Choose what shows up on the display
Program a name for a speed dial
The system has a standard name to display, so it is not necessary for you to
program one. However, if you have chosen not to display the telephone number,
you may want a specific name.
Press .
Press CHANGE to see your options: Use
prime line, a specific line (for example
Use line: 01), a line pool (for example
Pool code:71), or Use routing tbl.
Stop pressing CHANGE when the display shows the prime line again.
In this example, the system selects the
prime line automatically (the most
common choice), to dial speed dial code
01.
Press .
Your choices are Yes and No. Yes means
the display will show the telephone number.
Press
CHANGE.
No means the display will show a name for
the code.
Press .
Press .
This is the name the display will show if you
don’t change it. Press
CHANGE.
Decide the name you want to give to the
speed dial code.