Filter
Top Products
120 / Using System features
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide P0857846 Issue 02
• Manual allows you to turn the service on and off at any time from
a control telephone using a feature code.
• Automatic allows you to use the preassigned stop and start time
for a service. You are still able to start and stop the service by
entering the appropriate feature code at a control telephone. If
you select this setting, you will use the start and stop times
programmed by your installer or customer service
representative.
• Off prevents the service from being activated.
You will need the programming template found at the front of this
guide. See Getting Started for more information.
1. Press .
2. Press (the default System Coordinator
password).
3. Press twice.
4. Press at Services.
5. Press until you see the Service you want to program.
6. Press and
until you see the schedule you
want to program.
7. Press and use CHANGE to select the setting that will
work best for your office: Off, Manual or Automatic.
Each schedule can have its own configuration of a Service which
works independently of automatic start and stop times. For example,
there may be a version of Restriction service called Night Schedule
that prevents anyone from making long distance calls. But calling it
Night Schedule does not mean it can only be used with a schedule.
You can turn the Night Schedule for Restriction Service on or off as
needed any time of the day or night. If you decide to run a service
on a schedule, the system will use the start and stop times used for
that schedule.