Filter
Top Products
P0857846 Issue 02 Norstar-PLUS Modular ICS 2.0 System Coordinator Guide
User Preferences
The User Preferences section of programming allows you to
program memory buttons, speed dial codes and other settings for
any Norstar telephone on the system.
For example, an employee may want to have the Do Not Disturb
feature programmed onto a memory button or create a speed dial
code. Instead of programming from the employee’s telephone, you
can go into programming on the telephone nearest you to make the
change.
Using User Preferences
• Press
( ).
• Enter your System Coordinator or Basic password (the default
passwords are and ).
By using a Basic password, it is possible to have someone else do
day-to-day upkeep of people’s telephones without giving out access
to sensitive programming. See “Using passwords” on page 124.
After you enter the proper password, the display will show you the
telephone with the lowest internal number followed by its name (For
example, 221:Reception).
• Press to move through all the telephones on the
system.
• Press when you see the telephone you want to
change. The display shows the model number of the telephone
at the extension.
The display will show Connect set if no telephone is connected at
that internal number.
You cannot make changes if the model is Other.
• Press to move through all the subheadings in User
Preferences.