Filter
Top Products
126 / Using System features
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide P0857846 Issue 02
Changing passwords
You will need the programming template found at the front of this
guide. See Getting Started for more information.
1. Press .
2. Press (the default System Coordinator
password).
3. Press four times.
4. Press at Passwords.
5. Press until you see Progrming pswds ˆ.
6. Press .
7. Press until you see the name of the password you
want to change.
8. Use , CHANGE and the dial pad to enter the new
password. Press OK to accept the new password.
You cannot erase or eliminate the ability to program passwords.
Clearing a Call Log password
If an individual has forgotten their Call Log password, you can clear
it in programming. The individual can then enter a new password
from his or her telephone.
You will need the programming template found at the front of this
guide. See Getting Started for more information.
1. Press .
2. Press (the default System Coordinator
password).
3. Press four times.
4. Press at Passwords.
5. Press until the display shows Call log pswds.
6. Press and enter the internal telephone number of the
telephone where you wish to clear the Call Log password.
7. Press , then press CLR to clear the password.