Filter
Top Products
152 / Common feature displays
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide P0857846 Issue 02
The feature you tried to use requires you to
be on an active call at your telephone. This
display also appears when information about
a call has been cleared by a system reset.
All the lines or line pools available to the
telephone are in use. This display also
appears when you have tried to dial an
external number or use a feature that
conflicts with the lines, line pools or prime
line used by the telephone. This must be
corrected by your customer service
representative or installer.
The telephone has been set up to dial an
external number on a prime line but the
telephone does not have a prime line. This
must be corrected by your customer service
representative or installer.
You have tried to program redirection while
someone else is programming redirection.
Only one person can program line
redirection at a time.
The line you are trying to use for redirecting
calls is for incoming calls only. Choose an
outgoing line.
Continue entering digits. Press
or
BKSP to delete incorrect digits. Press
or OK when you are finished.
You have entered an invalid line pool code or
an invalid destination code.
You have selected a line that is private to
another telephone.
The destination you have chosen for line
redirection is restricted.