Filter
Top Products
IP Softphone 2050 Settings
81
To enable Manual Override, select the cadence you want from the list. To
disable Manual Override, select None.
Headset Disconnect
With Headset Disconnect enabled, the external lamp activates when the
headset registers as disconnected from the USB Headset Adapter.
To enable Headset Disconnect, select the cadence you want from the list.
To disable Headset Disconnect, select None.
Active Call
With Active Call enabled, the external lamp activates when the
IP Softphone 2050 registers an active call.
To enable Active Call, select the cadence you want from the list. To
disable Active Call, select None.
If you enable Active Call when the USB Headset Adapter is selected as
the Ringing Speaker, then the external lamp also activates on incoming
calls.
Note: Any other application using the same audio channel as the
USB Headset Adapter also activates the external lamp.
Message Waiting
With Message Waiting enabled, the external lamp activates when the
IP Softphone 2050 registers a message waiting.
To enable Message Waiting, select the cadence you want from the list. To
disable Message Waiting, select None.
Priority
If more than one condition is enabled, then the external lamp activates
according to the condition with the highest priority. The priority of the
conditions, from highest to lowest, is as follows:
• Manual Override
• Headset Disconnect
• Active Call