Filter
Top Products
IP Softphone 2050 Settings
67
To use the Automatic (DHCP) method:
1. Select the Automatic (DHCP) check box.
2. From the Server list, select your server. You can choose from the
Primary, Secondary, or Application (XAS) servers.
Note 1: Primary and Secondary servers are assigned by DHCP.
Note 2: XAS support is reserved for future use.
Using IP addresses and DNS names
If your communications server does not support DHCP, then you must
assign an IP address or DNS name manually.
To assign a manual IP address or DNS name, you must have the
following information about your communications server:
• IP address or DNS name
• Port number
• Server type
To assign an IP address or DNS name:
1. From the Server list, select the server you want to configure: Primary
or Secondary.
2. Select IP and enter the IP address, or select Name and enter the
DNS name.
3. From the Type list, select your server type.
The default port number shows in the Port text box.
4. If your server port number is different from the default number, enter
the correct number in the Port text box.
Note: Symposium call center agents must select the Symposium
check box.
Restoring defaults
To restore the settings dialog to its default settings, click Restore
Defaults.