Filter
Top Products
IP Softphone 2050 Settings
71
The Microphone text box displays the currently selected microphone. To
change the microphone, select the microphone you want to use from the
microphone list.
The Speaker text box displays the currently selected speaker. To change
the speaker, select the speaker you want to use from the speaker list.
To adjust the volume of the microphone and speaker, use the volume
slider bar.
To mute both devices, select Mute.
To return the settings to installation defaults, click Restore Original
Values.
Hardware ID
Note: This dialog box is intended for expert users only.
Use the Hardware ID dialog box to select the hardware address reported
to your communications server. The Hardware ID text box displays the
current hardware address.
MAC addresses
The IP Softphone 2050 default IP address comes from your Ethernet
hardware, as a Medium Access Control (MAC) address. If several
Ethernet interfaces are installed, then the IP Softphone 2050 chooses the
first MAC address it detects and uses that address in all subsequent re-
connections.
Note: Some Virtual Private Network (VPN) clients hide their MAC
addresses. In this case, you must override the default value to
prevent problems communicating with the server.