Filter
Top Products
Installing and setting up the IP Softphone 2050
31
Installing the USB Headset Kit
The IP Softphone 2050 supports a desktop USB headset adapter, as well
as a mobile adapter. Follow these steps to install the USB Headset Kit:
1. Ensure that you have the proper system requirements as listed in
“Nortel USB Audio Kit” on page 30.
2. Ask your system administrator to change settings, if necessary, to
allow you to connect the IP Softphone 2050 to the communication
server.
3. If using the mobile adapter, connect the headset to the adapter. If
using the desktop adapter, you must:
— Connect the coiled lower cord to the headset cord with the Quick
Disconnect connector (make sure it is securely fastened).
— Connect the headset cord to the RJ9 jack on the adapter.
4. Connect the USB cable to the headset adapter and to one of the USB
jacks on your computer or USB hub.
The first time the headset adapter is plugged in, a delay occurs while the
Windows operating system configures the device and locates appropriate
driver software. If the installation software asks for the original Windows
CD-ROM, insert the CD-ROM so that the Windows operating system can
locate drivers.
For more information about installing the IP Softphone 2050 software,
contact your system administrator.