Filter
Top Products
4 - 2 Rev A
8/6/08
Dolphin® Power Tools User’s Guide
When processing files, the terminal behaves as though disabled sections are not there and moves on to
the next enabled section.
Settings Section Keys
Note: This section and most of its keys are locked, which means that you can change the value but not the name
or description.
Programs’ Subsections
Here are a few of the standard child sections of the Programs section:
Note: Other subsections launch the executable entered in the Program (see page 4-3) key.
Key Function Default Available Values
Version Stores the EXM file version. 22 You cannot modify this
value!
ByPassKey Defines the key that can be pressed to bypass
Autorun
42=SCAN key
StartMenu Enables and disables the Start menu during
Autorun
1 0=Disable; the Start
menu is disabled
during Autorun.
1=Enable; the Start
menu is enabled.
Debug Controls the debug function at AutoInstall. 0 0=Disable
1=Enable, an
autorun.log file is
created in the
\IPSM folder.
TestMode Runs the terminal in test mode and tests the
functionality of AutoInstall. This is a diagnostic tool.
When enabled, applications stored in the
AutoInstall folder, including the radio drivers, are
not loaded during startup.
0 0=Disable
1=Enable
EZConfigKey Specifies a key that launches EZConfig Client
before Autorun starts processing the Programs
section; i.e., before Autorun starts launching
programs.
9=Tab
key
Empty=You must launch
EZConfig Client to
scan bar codes from
EZConfig Editor
Section Description
Update Attempts to launch an Update.exe application from the SD (Secure Digital) card, if one exists.
AutoRun
SC1 & SC2
Attempts to process an Autorun configuration file from the SD card (if one exists); for example,
to install CAB files from the AutoInstall folder in the SD card. One section applies to cold boots
and the other to warm boots.
Reset Initiates a warm boot after the cold boot during startup. Do NOT disable the Reset section!