Filter
Top Products
2 - 8 Rev A
8/6/08
Dolphin® Power Tools User’s Guide
Edit Menu Options
Select a section click Edit to see the available options.
Menu Item Description
Rename Activates the section name so that you can rename the section.
Note: You cannot modify the name if the section is locked; see Section Locks (page 2-10).
Cut Cuts a selected section.
Copy Copies a selected section.
Paste Pastes the section that was just cut or copied at the same level as the selected section.
Paste as Child Pastes the section that was just cut or copied as a child of the selected section.
Note: You can cut, copy and paste sections within an EXM file or across EXM files.
Delete Deletes a selected section.
Note: Because you cannot undo a delete, consider disabling rather than deleting.
Enable Sections are enabled by default. This menu item enables sections that were previously
disabled. You can enable a section only if its parent section is enabled.
To enable all the keys inside a section you are enabling, SHIFT + right-click and select
Enable All.
Disable All Sections are enabled by default. This menu item disables sections and all of its keys.
Disabled sections remain in the file with a gray folder .
If you disable a section that has child sections, all of its child sections (and the child section
keys) are disabled automatically. The child section folders are also in gray.
When reading the EXM file, the terminal behaves as though disabled sections are not there
and moves on to read the next enabled section.
Disabled sections can be removed from the EXM file permanently using the Simplify
Document (see page 2-5) option. If you want to keep disabled sections in the EXM file on
the workstation but not in the file deployed to the terminal, use the Simplified option (see
page 2-23) when creating the bar code.