Filter
Top Products
9-8
Cisco 6400 Service Connection Manager User Guide
OL-0569-01
Chapter 9 Service/Subscriber Provisioning
Defining Policies For Service Provisioning
Deleting an Existing PPPoA-SD Service Profile
To delete an existing PPPoA service profile, follow these steps:
Step 1 Select the Cisco6400 UAC, Profiles, Configure PPPoA-SD Service Profiles option from a Site, Shelf,
Chassis, or service instance object in the MapViewer window.
The PPPoA-SD Service Profile Configuration window appears. Existing service profiles are displayed
in the PPPoA-SD Service Profiles list on the left side of the window.
Figure 9-8 PPPoA-SD Service Profile Configuration Window (PPPoA-SD Configuration Tab)
Step 2 Select the existing service profile (displayed in the PPPoA-SD Service Profiles list) that you wish to
delete.
Step 3 Select the Delete Profile option from the Edit menu. Select the profile you wish to delete from the list
displayed.
A Deletion Prompt window appears (see Figure 9-9) for you to confirm that you wish to delete the
selected profile.
Figure 9-9 Deletion Prompt Window
Step 4 Click Yes to delete the selected profile or click No to close the window without deleting the profile.
When a profile is deleted it disappears from the list of PPPoA Service Profiles in the PPPoA-SD Service
Profile Configuration window.