Filter
Top Products
9-33
Cisco 6400 Service Connection Manager User Guide
OL-0569-01
Chapter 9 Service/Subscriber Provisioning
Defining Policies For Service Provisioning
Step 7 Click Forward.
Step 8 Repeat steps 6 and 7 for the Number of Connection Template objects entered in step 4.
Step 9 The Deployment Summary details appear in the Deployment Wizard - Summary window (see
Figure 9-45).
Figure 9-45 Deployment Wizard - Summary Window
Step 10 Check the summary information displayed is correct.
Step 11 Click Finish (when the Deployment Summary information is correct) to complete the deployment.
After deploying a connection template, you should then configure them. Proceed to the “Configuring
Connection Templates” section on page 9-33 for further details.
Configuring Connection Templates
To configure connection templates, follow these steps:
Step 1 Place the cursor over a relevant object in the a network map, a relevant object in the map view, or use
an object pick list on an open Element Manager window. See the Table 9-1 on page 9-2 for information
on the objects you can deploy from.
Step 2 Click and hold down the right mouse button.
Check the
Deployment
Summary
information
is correct
41503