Filter
Top Products
9-42
Cisco 6400 Service Connection Manager User Guide
OL-0569-01
Chapter 9 Service/Subscriber Provisioning
Service Provisioning
Figure 9-54 ATM Service Configuration Window (Service Uplink Tab)
Step 7 Enter details into the parameters displayed in the Service Uplink PVC panel, as required. See the
“Service Uplink Tab” section on page 10-25 for further details on the parameters displayed.
Commissioning the Pure ATM Service Instance
Note This is the first stage at which you actually “roll” the selected service configuration onto
the Cisco 6400 UAC hardware.
Step 8 Click Commission Service to save the configuration information you have entered and roll the service
onto the Cisco 6400 UAC. A pop up window appears for you to confirm that you wish to commission
the selected service.
Figure 9-55 About to Change Service State Confirmation Window
Step 9 Select Yes to commission the service (or No to return to the ATM Service Instance Configuration
window without commissioning the ATM service). An Action Report window appears. The Action
Report window details the Cisco IOS commands executed when the service is commissioned. Invalid
Cisco IOS commands result in a failure to commission the service.