Filter
Top Products
9-62
Cisco 6400 Service Connection Manager User Guide
OL-0569-01
Chapter 9 Service/Subscriber Provisioning
Service Provisioning
Step 11 Select Yes to commission the service (or No to return to the IP Uplink Service Configuration window).
The Action Report window appears.
Figure 9-79 Action Report Window
The Action Report window details the Cisco IOS commands executed when the service is
commissioned. Invalid Cisco IOS commands result in a failure to commission the service.
Step 12 Check the details in the Action Report window to ensure that the service was commissioned
successfully.
Caution The Cisco 6400 SCM will roll-back configuration changes applied if an error is detected
in the execution of the Cisco IOS command sequence with your selected parameters. This
insures that the Cisco 6400 UAC remains in a consistent state, even when errors are made
entering parameters.
Step 13 Select Save to save the Action Report, if required.
Step 14 Select Close to close the Action Report window and return to the Service Instance Configuration
window.
Step 15 Select Save from the File menu to save the parameters configured.
Select Close from the File menu to close the IP Uplink Service Configuration window.