Filter
Top Products
9-26
Cisco 6400 Service Connection Manager User Guide
OL-0569-01
Chapter 9 Service/Subscriber Provisioning
Defining Policies For Service Provisioning
Step 2 Select Create Profile. A Prompt window appears (see Figure 9-35).
Figure 9-35 Prompt Window
Step 3 Enter a name for the profile in the Enter profile name data entry box. IP Uplink Bronze was entered
in the example shown in Figure 9-35.
Note Each service profile must have a unique name. Do not insert spaces into a service
profile name.
The new profile name appears in the IP Uplink Service Profiles list on the left side of the window (see
Figure 9-36).
Figure 9-36 IP Uplink Service Profile Configuration Window (Configuration Tab)
Step 4 Configure the parameters displayed in the Configuration tab (shown in Figure 9-34), as required. The
Configure option (in the Local Service Profile panel on the Configuration tab) must be set to Yes to
allow you to configure the parameters displayed in the Local Service Profile tab.