Filter
Top Products
9-56
Cisco 6400 Service Connection Manager User Guide
OL-0569-01
Chapter 9 Service/Subscriber Provisioning
Service Provisioning
Applying a RFC1483 IRB Service Profile
Step 3 Select Apply Profile from the Edit menu.
Step 4 Select the appropriate profile from the list of profiles displayed. The profile parameters are copied to
the appropriate service instance parameters in the RFC1483 IRB Service Configuration window and
appear in blue.
Configuring the RFC1483 IRB Service Parameters
Step 5 Configure the parameters displayed on the Configuration tab, as required.
Step 6 Select the Service Details tab.
Figure 9-71 RFC1483 IRB Service Configuration Window (Service Details Tab)
See the “Service Details Tab” section on page 10-41 for details on the parameters displayed.
Step 7 Enter a Service Description in the Service Details panel, if required.
Step 8 Select whether to Allow or Prevent oversubscription.
Oversubscription is set to Allow by default and an unlimited number of subscribers can be connected
to the service. Selecting to Prevent Oversubscription ensures that the SCM limits the number of
subscribers connected such that the sum of the subscriber’s peak cell rates never exceeds the peak cell
rate reserved for the service on the uplink. Oversubscription functionality is not applicable to the
PPPoA-SD and ATM services.
Step 9 Select a connection from the Connection list and configure the values in the Subscriber Connections
panel, as required.