Filter
Top Products
9-76
Cisco 6400 Service Connection Manager User Guide
OL-0569-01
Chapter 9 Service/Subscriber Provisioning
Subscriber Provisioning
Step 8 Configure the parameters displayed in the Connect to Single Domain tab, as required.
Step 9 Select the Connect to Multi-Domain tab.
Figure 9-93 Service/Subscriber Connection Window (Connect to Multi-Domain Tab)
Step 10 Select an NRP from the Node Route Processor list.
Step 11 Configure the parameters displayed in the Connect to Multi-Domain tab, as required.
Step 12 Click Connect. A pop up window appears (see Figure 9-94) asking you to confirm that you wish to
connect the selected subscriber.
Figure 9-94 Connect Subscriber to NRP Window
Step 13 Click Yes to proceed. An Action report window appears displaying the Cisco IOS transaction log as
connection occurs.