Filter
Top Products
9-72
Cisco 6400 Service Connection Manager User Guide
OL-0569-01
Chapter 9 Service/Subscriber Provisioning
Subscriber Provisioning
Step 5 Select the Subscriber Details (Optional) tab.
Figure 9-90 Subscriber Configuration Window (Subscriber Details (Optional) Tab)
Note Entering information intothe Subscriber Details(Optional) tab isvoluntary. You
can enter any information you like into the Subscriber Details tab. For example,
you may decide to enter a subscriber identification in the Subscriber Name box
and an e-mail address in the Subscriber Address box.
Step 6 Enter a Contact ID / Name and Contact Address into the Contact Name & Address panel, as required.
Step 7 Enter a Subscriber ID / Name and Subscriber Details into the Subscriber Name & Address panel, as
required.
Step 8 Select the Save option from the File menu to save the subscriber information.
Step 9 Select the Close option from the File menu to close the Subscriber Configuration window.
Connecting a Subscriber to a Service Instance
Subscribers are connected to service instances within the Service/Subscriber Connection window. The
Service/Subscriber Connection window displays three tabs: Connection details, Connect to Single
Domain, and Connect to Multi-Domain. Configuration information is required into one or more tabs
when connecting a subscriber to a service instance. Certain parameters are grayed out, depending upon
what type of service you are trying to connect to.