Filter
Top Products
9-59
Cisco 6400 Service Connection Manager User Guide
OL-0569-01
Chapter 9 Service/Subscriber Provisioning
Service Provisioning
Configuring and Commissioning an IP Uplink (for PTA-MD and RBE Subscribers) Service Instance
To configure and commission an IP Uplink service instance, follow these steps:
Step 1 Select the Cisco 6400 UAC, Service, Configure IP Uplink Service option from a Site, Shelf, Chassis,
or service instance object. The IP Uplink Service Configuration window appears (see Figure 9-75).
Figure 9-75 IP Uplink Service Configuration Window (IP Uplink Configuration Tab)
See the “Service Uplink Tab” section on page 10-50 for further details on the parameters displayed.
Step 2 Select the appropriate Cisco 6400 and IP Uplink service instance from the lists displayed on the left
side of the window.
Only the IP Uplink service instance objects (for the selected chassis) are displayed in the IP Uplink
Services list. Service instances for other service types are listed in their appropriate Service
Configuration windows. For example, L2TP service instance objects are displayed in the L2TP
Configuration window. The IP Uplink Services list is empty when no IP Uplink Service instances have
been created. See the “Creating a Service Instance” section on page 9-36 for details on how to create a
service instance.
Note Proceed to the “Configuring the IP Uplink (for PTA-MD and RBE Subscribers)
Service Parameters” section on page 9-60 when you are not applying a IP Uplink
service profile.