Filter
Top Products
9-51
Cisco 6400 Service Connection Manager User Guide
OL-0569-01
Chapter 9 Service/Subscriber Provisioning
Service Provisioning
Configuring and Commissioning an RFC1483 Bridging Service Instance
To configure and commission an RFC1483 Bridging service instance, follow these steps:
Step 1 Select the Cisco 6400 UAC, Service, Configure RFC1483 Bridging Service option from a Site, Shelf,
Chassis, or service instance object. The RFC1483 Bridging Service Configuration window appears:
Figure 9-65 RFC1483 Bridging Service Configuration Window (Configuration Tab)
See the “Configuration Tab” section on page 10-34 for further details on the parameters displayed.
Step 2 Select the appropriate Cisco 6400 and RFC1483 Bridging Service from the lists displayed on the left
side of the window.
Only the RFC1483 Bridging service instance objects (for the selected chassis) are displayed in the
RFC1483 Bridging Services list. Service instances for other service types are listed in their appropriate
Service Configuration windows. For example, L2TP service instance objects are displayed in the L2TP
Configuration window. The RFC1483 Bridging Services list is empty when no RFC1483 Bridging
Service instances have been created. See the “Creating a Service Instance” section on page 9-36 for
details on how to create a service instance.
Note Proceed to the “Configuring the RFC1483 Bridging Service Parameters” section
on page 9-52 when you are not applying a service profile.