Filter
Top Products
9-48
Cisco 6400 Service Connection Manager User Guide
OL-0569-01
Chapter 9 Service/Subscriber Provisioning
Service Provisioning
Applying an L2TP Service Profile
Step 3 Select Apply Profile from the Edit menu.
Step 4 Select the appropriate profile from the list of profiles displayed. The profile parameters are copied to
the appropriate service instance parameters in the L2TP Service Configuration window and appear in
blue.
Configuring the L2TP Service Parameters
Step 5 Configure the parameters displayed on the Configuration tab, as required.
Step 6 Select the Service Details tab.
Figure 9-61 L2TP Service Configuration Window (Service Details Tab)
See the “Service Details Tab” section on page 10-31 for further details on the parameters displayed.
Step 7 Enter a Service Description in the Service Details panel, if required.
Step 8 Select Allow or Prevent over-subscription.
Over-subscription is set to Allow by default and an unlimited number of subscribers can be connected
to the service. Selecting to Prevent Oversubscription ensures that the SCM limits the number of
subscribers connected such that the sum of the subscriber’s peak cell rates never exceeds the peak cell
rate reserved for the service on the uplink. Over-subscription functionality is not applicable to the
PPPoA-SD and ATM services.
Step 9 Select a connection from the Current Connection list and configure the values in the Subscriber
Connections panel, as required.
Step 10 Select the Service Uplink tab.