Filter
Top Products
9-4
Cisco 6400 Service Connection Manager User Guide
OL-0569-01
Chapter 9 Service/Subscriber Provisioning
Defining Policies For Service Provisioning
To create a PPPoA-SD service profile, follow these steps:
Step 1 Select the Cisco6400 UAC, Profiles, Configure PPPoA-SD Service Profiles option from a Site, Shelf,
Chassis, or service instance object in the MapViewer window. Profiles are “globally” available within
the Cisco 6400 SCM.
The PPPoA-SD Service Profile Configuration window appears with the Configuration tab displayed.
Figure 9-3 PPPoA-SD Service Profile Configuration Window (Configuration Tab)
Step 2 Select Create Profile.
A Prompt window appears (see Figure 9-4) for you to enter a name for you new profile.
Figure 9-4 Prompt Window
Step 3 Enter a name for the profile in the Enter profile name data entry box. PPPoA-SDSilver was entered in
the example shown in Figure 9-4.
Note Each service profile must have a unique name. Do not insert spaces into a service
profile name.