Filter
Top Products
D-5
Cisco Wireless LAN Controller Configuration Guide
OL-8335-02
Appendix D System Messages and Access Point LED Patterns
Using Client Reason and Status Codes in Trap Logs
Client Status Codes
This table lists client status codes.
Client Status Codes
2 previousAuthNotValid Client associated but not authorized.
3 deauthenticationLeaving The access point went offline,
deauthenticating the client.
4 disassociationDueToInactivity Client session timeout exceeded.
5 disassociationAPBusy The access point is busy, performing load
balancing, for example.
6 class2FrameFromNonAuthStation Client attempted to transfer data before it
was authenticated.
7 class2FrameFromNonAssStation Client attempted to transfer data before it
was associated.
8 disassociationStaHasLeft Operating System moved the client to
another access point using non-aggressive
load balancing.
9 staReqAssociationWithoutAuth Client not authorized yet, still attempting to
associate with an access point.
99 missingReasonCode Client momentarily in an unknown state.
Table D-2 Client Reason Code Descriptions and Meanings (continued)
Client
Reason
Code Description Meaning
Table D-3 Client Status Code Descriptions and Meanings
Client
Status
Code Description Meaning
0 idle Normal operation — no rejections of client
association requests.
1 aaaPending Completing an AAA transaction.
2 authenticated 802.11 authentication completed.
3 associated 802.11 association completed.
4 powersave Client in powersave mode.
5 disassociated 802.11 disassociation completed.
6 tobedeleted To be deleted after disassociation.
7 probing Client not associated or authorized yet.
8 disabled Automatically disabled by Operating System
for an operator-defined time.