Filter
Top Products
D-3
Cisco Wireless LAN Controller Configuration Guide
OL-8335-02
Appendix D System Messages and Access Point LED Patterns
System Messages
LRADIF_CURRENT_CHANNEL_CHANGED Informational message.
LRADIF_RTS_THRESHOLD_CHANGED Informational message.
LRADIF_ED_THRESHOLD_CHANGED Informational message.
LRADIF_FRAGMENTATION_THRESHOLD_
CHANGED
Informational message.
RRM_DOT11_A_GROUPING_DONE Informational message.
RRM_DOT11_B_GROUPING_DONE Informational message.
ROGUE_AP_DETECTED May be a security issue.Use maps and trends to
investigate.
ROGUE_AP_REMOVED Detected rogue access point has timed out. The
unit might have shut down or moved out of the
coverage area.
AP_MAX_ROGUE_COUNT_EXCEEDED The current number of active rogue access points
has exceeded system threshold.
LINK_UP Positive confirmation message.
LINK_DOWN Port may have a problem or is administratively
disabled.
LINK_FAILURE Port may have a problem or is administratively
disabled.
AUTHENTICATION_FAILURE Attempted security breech. Investigate.
STP_NEWROOT Informational message.
STP_TOPOLOGY_CHANGE Informational message.
IPSEC_ESP_AUTH_FAILURE Check WLAN IPSec configuration.
IPSEC_ESP_REPLAY_FAILURE Check for attempt to spoof IP Address.
IPSEC_ESP_POLICY_FAILURE Check for IPSec configuration mismatch between
WLAN and client.
IPSEC_ESP_INVALID_SPI Informational message.
IPSEC_OTHER_POLICY_FAILURE Check for IPSec configuration mismatch between
WLAN and client.
IPSEC_IKE_NEG_FAILURE Check for IPSec IKE configuration mismatch
between WLAN and client.
IPSEC_SUITE_NEG_FAILURE Check for IPSec IKE configuration mismatch
between WLAN and client.
IPSEC_INVALID_COOKIE Informational message.
RADIOS_EXCEEDED Maximum number of supported Cisco Radios
exceeded. Check for controller failure in the same
Layer 2 network or add another controller.
SENSED_TEMPERATURE_HIGH Check fan, air conditioning and/or other cooling
arrangements.
Table D-1 System Messages and Descriptions (continued)
Error Message Description