Filter
Top Products
D-2
Cisco Wireless LAN Controller Configuration Guide
OL-8335-02
Appendix D System Messages and Access Point LED Patterns
System Messages
System Messages
Table D-1 lists system messages and descriptions.
Table D-1 System Messages and Descriptions
Error Message Description
STATION_DISASSOCIATE Client may have intentionally terminated usage or
may have experienced a service disruption.
STATION_DEAUTHENTICATE Client may have intentionally terminated usage or
it could indicate an authentication issue.
STATION_AUTHENTICATION_FAIL Check disable, key mismatch or other
configuration issues.
STATION_ASSOCIATE_FAIL Check load on the Cisco Radio or signal quality
issues.
LRAD_ASSOCIATED The associated Cisco 1000 Series lightweight
access point is now managed by this Cisco
Wireless LAN Controller.
LRAD_DISASSOCIATED Cisco 1000 Series lightweight access point may
have associated with a different Cisco Wireless
LAN Controller or may have become completely
unreachable.
LRAD_UP Cisco 1000 Series lightweight access point is
operational, no action required.
LRAD_DOWN Cisco 1000 Series lightweight access point may
have a problem or is administratively disabled.
LRADIF_UP Cisco Radio is UP.
LRADIF_DOWN Cisco Radio may have a problem or is
administratively disabled.
LRADIF_LOAD_PROFILE_FAILED Client density may have exceeded system
capacity.
LRADIF_NOISE_PROFILE_FAILED The non-802.11 noise has exceed configured
threshold.
LRADIF_INTERFERENCE_PROFILE_FAILED 802.11 interference has exceeded threshold on
channel -- check channel assignments.
LRADIF_COVERAGE_PROFILE_FAILED Possible coverage hole detected - check Cisco
1000 Series lightweight access point history to see
if common problem - add Cisco 1000 Series
lightweight access points if necessary.
LRADIF_LOAD_PROFILE_PASSED Load is now within threshold limits.
LRADIF_NOISE_PROFILE_PASSED Detected noise is now less than threshold.
LRADIF_INTERFERENCE_PROFILE_PASSED Detected interference is now less than threshold.
LRADIF_COVERAGE_PROFILE_PASSED Number of clients receiving poor signal are within
threshold.
LRADIF_CURRENT_TXPOWER_CHANGED Informational message.