Filter
Top Products
652.0 Configuring TalkSwitch
2.3.5 Options
2.3.5.1 Administrator Password
This tab allows you to set up the Administrator password for TalkSwitch. The
Administrator password gives access to all configuration options. The password that
is entered here will be used at configuration start-up and through DTMF
configuration.
Administrator password:
To activate the use of an administrator password, entera4to8digit password and
then confirm the password. Next, click the ‘Verify Password’ button to have the
software validate the password. The password can only contain numbers since it
is also used to gain access to the system using a touch tone phone.
If there is a problem with the password, you will need to re-enter the password
and then confirm it. If you do not want a password or want to delete the existing
password, simply clear the password field and click ‘Verify Password’. TalkSwitch
will no longer require a password for configuration.
If the administrator forgets their password, the only option to gain access to the
configuration settings is to contact Centrepoint Technologies.
TS-user manual 7th ED v3 Release.qxd 8/27/02 4:57 PM Page 65