Filter
Top Products
36 TalkSwitch User Manual
2.3.1.7 Music-on-hold
If you wish to have callers listen to music or advertising while they are on hold, you
will need to enable Music-on-hold in this tab.
Note: If you connect a music source to the Music jack and do not enable Music-on-
hold, the caller will hear both music and a beep sound when on hold. Also when the
caller makes a selection at the Auto Attendant to go to an extension that has call
screening enabled, they will hear both ringing and music.
If you have more than one unit connected to the LAN, you will need to
provide a music source to all units. A 1/8” audio splitter can usually be
obtained at most electronics stores.
For more information on using Music-on-hold, please see section 3.5.
Networked
TS-user manual 7th ED v3 Release.qxd 8/27/02 4:56 PM Page 36