Talkswitch 48 Telephone User Manual


 
56 TalkSwitch User Manual
2.3.3.6 Extension Ring Groups - Call Cascade
The following section configures the incoming call routing options for Ring Groups.
The Call Cascade routing options are only engaged if the Ring Group has been
chosen from the Auto Attendant or if a call has been manually transferred to the Ring
Group. Once a call enters a Ring Group’s Call Cascade sequence, the Ring Group
“owns” the call. It will not follow any other extensions options even if chosen in the
Call Cascade sequence - what you see in a Ring Group’s Call Cascade sequence is
exactly what you’ll get.
For Ring Groups, there are 3 different Call Cascade options. For each of these options,
you can control how and where you want the incoming call handled with up to 3
'cascade' destinations available. You can set up the Call Cascade sequences for both
Modes (the scheduling for these modes are set up on the Modes tab).
1. Busy at extension - routing options when all the extensions in the Ring
Group are busy
Cascade options include forwarding calls to a Local Extension, Remote
Extension, Extension Ring Group, built in Voicemail, Announcement,
Auto Attendant, play busy tone, queue caller or hang up.
2. No answer at ext. - routing options when all the extensions in the Ring
Group do not answer after a specified number of rings.
Cascade options include forwarding calls to a Local Extension, Remote
Extension, Extension Ring Group, built in Voicemail, Announcement,
Auto Attendant, keep ringing or hang up.
TS-user manual 7th ED v3 Release.qxd 8/27/02 4:57 PM Page 56