Filter
Top Products
114
TalkSwitch User Manual
DTMF descriptions dialed from a Local Extension.
DTMF
1x1-1x8
119
2x1-2x8
300-309
<flash> if
connected to a
caller
<flash> at
internal dialtone
<flash> at
external dialtone
1x1-1x8
2x1-2x8
4x0-4x9
1x1-1x8
2x1-2x8
4x0-4x9
<flash>4
0
Function performed
Intercoms a Local Extension
Reserved
Dials a Remote Extension (associated
with an external phone number).
Dials an Extension Ring Group - 10 in
total for the entire system. Mapped to
local extension(s), with specific fall
through options.
Puts caller on hold.
It retrieves the most recent caller put on
hold.
Switches to internal dialtone. Used
mainly when an extension has Direct
Line Access enabled.
Dials into a voice mailbox.
Internal voicemail retrieval/access.
Completes a transfer and returns to
internal dialtone
External P.A. Access
Notes
Direct dial from dialtone.
x represents the Unit ID
Direct dial from internal dialtone.
Direct dial from internal dialtone.
x represents the Unit ID
Direct dial from internal dialtone.
After putting a caller on hold, you receive
internal dialtone.
To retrieve the caller on hold for the most
time, dial 7 at internal dialtone
Dialed when connected to an outside line.
To transfer a caller to a mailbox, press
'flash' to place a call on hold, then 1x1-
1x8, 2x1-2x8, or 4x0-4x9 and hang
up.
x represents the Unit ID
Direct dial 1x1-1x8, 2x1-2x8,
or 4x0-4x9 from internal dialtone to
retrieve voicemail.
x represents the Unit ID
Action performed after putting a caller on
Hold then dialing an indented destination.
Direct dial 0 at dial tone to make an
announcement through the attached
external P.A. system.
Networked
Networked
Networked
Networked
TS-user manual 7th ED v3 Release.qxd 8/27/02 4:57 PM Page 114